SKU: 89577266340

2021-2024 Ducati Multistrada V4 S Winglet Mirrors Pair

$16.99 $18.88
Save 10%
No.2 Bestseller on ls-photo.de >

Pay in installments of $4.72 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 24 - Oct 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2021-2024 Ducati Multistrada V4 S Winglet Mirrors PairMotorcycle Wind Wing Adjustable Swivel Mirror Fit For Yamaha MT 07 MT 09 MT 10 2016 2024 Features: Made of billet aluminium, it has a convex glass surface to provide a wider viewing angle. Specifically designed for supersport bikes. The mirror consists of a fixed part and a movable part, Fixed part, created to make it suitable to many bikes thanks to a specific handlebar mounting kit. Movable part, which acts as a mirror glass holder. A simple

Motorcycle Wind Wing Adjustable Swivel Mirror Fit For Yamaha MT-07 MT-09 MT-10 2016-2024

Features:
Made of billet aluminium, it has a convex glass surface to provide a wider viewing angle.
Specifically designed for supersport bikes.
The mirror consists of a fixed part and a movable part,
Fixed part, created to make it suitable to many bikes thanks to a specific handlebar mounting kit.
Movable part, which acts as a mirror glass holder.
A simple movement could get two parts aligned due to a rotating system.
It's a rearview mirror when open, it becomes an aerodynamic wing when closed.
Included 2x right-hand M8x30 bolts, 2x Right-hand M10x30 bolts, 1x left-hand M10x30 bolt, 1x right-hand M8x30 bolt, collars and mirror hole caps.
Easy to install, installation instruction NOT included.

Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 Pair (Left & Right)
Material: Aluminum
Surface Finish: Die-casted
Glass Color: White
Glass Type: Convex
Placement on Vehicle: Front (Left & Right)
Mirror Surface: approx. 103mm wide at widest point X 35 mm high at highest point

Fits Models:
Fit for Yamaha MT-07 2021-2023
Fit for Yamaha MT-09 2019-2024
Fit for Yamaha MT-09 SP 2021-2024
Fit for Yamaha MT-10 2016-2023

Universal 8mm / 10mm winglet mirrors, "fits models" only for reference,
fits many motorbike / sportbike / streetbike. Please check out your bike-specific mirror mounting adapters before you purchase.
Such as:
Fit for Ducati Diavel 1260 2019-2022
Fit for Ducati Diavel 1260 S 2019-2022
Fit for Ducati Hypermotard 950 2019-2024
Fit for Ducati Hypermotard 950 SP 2019-2024
Fit for Ducati Monster 821 2018-2021
Fit for Ducati Monster 937 2021-2024
Fit for Ducati Monster 937+ 2023-2024
Fit for Ducati Monster 1200 2014-2021
Fit for Ducati Monster 1200 25 Anniversario 2018-2019
Fit for Ducati Monster 1200R 2016-2021
Fit for Ducati Monster 1200S 2014-2021
Fit for Ducati Multistrada V4 2021-2024
Fit for Ducati Multistrada V4 Pikes Peak 2022-2024
Fit for Ducati Multistrada V4 RS 2024
Fit for Ducati Multistrada V4 Rally 2023-2024
Fit for Ducati Multistrada V4 S 2021-2024
Fit for Ducati Scrambler 800 Icon 2021-2022
Fit for Ducati Scrambler 1100 2018-2022
Fit for Ducati Scrambler 1100 Special 2018-2021
Fit for Ducati Scrambler 1100 Sport 2018-2022
Fit for Ducati Scrambler 1100 Sport Pro 2023
Fit for Ducati Streetfighter V2 2022-2023
Fit for Ducati Streetfighter V4 2020-2023
Fit for Ducati Streetfighter V4 SP 2022-2023
Fit for Ducati Streetfighter V4S 2020-2023
Fit for Ducati XDiavel 2019-2022
Fit for Ducati XDiavel S 2019-2023
Fit for Husqvarna Svartpilen 401 2021-2023
Fit for Husqvarna Vitpilen 401 2021-2023
Fit for Husqvarna Vitpilen 701 2018-2020
Fit for Kawasaki Z650 2017-2022
Fit for Kawasaki Z900 2017-2024
Fit for Kawasaki Z H2 2020-2023
Fit for MV Agusta Brutale 800 2013-2022
Fit for MV Agusta Brutale 800 RR 2013-2023
Fit for MV Agusta Brutale 1100 RR 2017-2022
Fit for Suzuki GSX-S 750 2017-2020
Fit for Suzuki GSX-S 950 2021-2022
Fit for Suzuki GSX-S 1000 2021-2023
Fit for Suzuki Katana 2022-2023
Fit for Suzuki SV 650 2021-2023
Fit for Aprilia Tuono 660 2020-2024
Fit for Aprilia Tuono 660 Factory 2022-2024
Fit for Aprilia Tuono V4 1100 2021-2024
Fit for Aprilia Tuono V4 1100 Factory 2015-2024
Fit for Aprilia Tuono V4 1100 RR 2015-2020

(Compatibility Chart is for Reference ONLY!!!
Please Compare with Your faulty unit and the image / size we provided to Decide Fitments.)

Package includes:
Pair of Winglet Mirrors
2x right-hand thread M8x30 bolts
2x Right-hand thread M10x30 bolts
1x right-hand thread M8x30 bolt
1x left-hand thread M10x30 bolt

(The product contains all that can be seen in the picture.)

Attention:
This product is not certified compliant.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 89577266340

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Charlottesville, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Pawtucket, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Massapequa, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Pawtucket, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Bozeman, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products

Santa Marta Terracotta Tide Beaded Necklace | 18K Gold Plated
125.00
Jave Colombian Statement Beaded Necklace | 18K Gold Plated
195.00
Messenger Saffiano Leather Messenger Bag
123.16
Sculpted Arc Ponytail Barrette | Silver-Black
118.00
Brushed Calf Italian Leather Belt | Silver Hardware | 35mm
58.29